The versatility of Pneumatic excessive stress grouting pumps

Peumatic Grouting pump is designed for strain and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes in order to reinforce the loose rock mass. The most grain size cannot exceed zero.2 mm.
Grouting pump operation and maintenance is simple, protected and dependable. This pump is used in mines working underneath difficult conditions because it’s dependable and explosion-proof.
Basic Pneumatic Grouting pump embody: An air inlet, the pneumatic cylinder, mounting base body and stand, pressure gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it works
Pneumatic strain within the air cylinder exerts a excessive pressure on the grout mixture which results in ejection of grout with a high stress and velocity. The valves of the air cylinder within the pump operate mechanically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to finish the pumping cycle.
Pneumatic grout pump could be driven even with out Electrical energy provide in remote areas by utilizing engine pushed compressor.
The pump is majorly utilized in construction and mining business for injecting materials into extensive and medium size hole in beams, columns ,basement partitions and flooring, carry shaft concrete wall fill-up and so on. In mining business it’s used to replenish cement answer the place there’s a gap exists between structure and rock and for soil stabilization.
Detachable design tends to easy upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is broadly utilized in tunnels, coal mine, bridges and dams, constructing foundation, and different underground projects, and inflammable, explosive sites and other unhealthy surroundings.
It has utility in chemical trade also to pump out chemical slurries.
The pump is electricity free so, can be used at any web site situation whether or not it’s rural or city.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the ultimate quantity of the grouting quantity is eight or10 times of the amount in the beginning. And the final grouting quantity proves that filling is compacted.
Simply put; เกจวัดแรงดันดิจิตอล -pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and move could be adjusted in accordance with the necessities of grouting,(The circulate of grouting pump is 0-100L/min, pressure of discharge is 0-10MPa).in addition to, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is mainly used for highways, railways, water and electricity, building, mining and so forth. ground/underground building.
Mining Pneumatic Grouting pump has the advantages of low energy consumption, small vibration, low noise, small measurement, excessive effectivity, reliable efficiency, strain and flow control, long life and so forth. เกจวัดแรงดันถังออกซิเจน grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can be Light weight and with a wheelie design it can be carried easily. It is designed for easy operation and low maintenance. Last but not least its spare parts are simply obtainable.

Leave a Comment